Rack to Pedestal Conversion Guide - HP Integrity rx6600 Server

Figure 3-1 Server Rear
1
2
1
Finger
Grips
2
Thumb
Screws
Removing the Pedestal Sides
Follow these steps to remove the pedestal sides.
1. Looking from the bottom locate the lock release slot.
2. Insert a regular (flat head) screwdriver into the lock release slot. See Figure 3-2.
3. Slide the screwdriver into the lock release slot. See Figure 3-4.
4. Pull back on the side.
5. Once the pedestal side has moved about 1/4 inch, the lock will release, and the screwdriver
can be removed.
6. Pull the side away from the server.
Removing the Pedestal Sides 17