Rack to Pedestal Conversion Guide - HP Integrity rx6600 Server

Figure 3-2 Lock Release Slot
1
1
Lock Release
Slot
Flip the procedure on the other side.
Removing the Bezel Cover
To remove the bezel cover:
1. Release the locking tabs behind the right corners of the bezel cover. See Figure 3-3.
2. Pull the cover away from the server.
Figure 3-3 Locking Tab
1
1
Locking
Tab
Removing the Caster Wheels
1. Turn the server onto its right side.
WARNING! Be careful when lifting the server as it is heavy.
CAUTION: Be sure the server handles are in (against the server) to prevent damaging the
handles.
The server will be slightly more difficult to turn on its side with the caster wheels attached.
2. With the left side facing up, lift up the two metal tabs holding the caster wheel assemble in
place.
3. With the tabs lifted, pull down on the caster wheel until they slide off. See Figure 3-4.
4. Repeat for the second wheel.
18 Pedestal to Rack Conversion