Rack to Pedestal Conversion Guide - HP Integrity rx6600 Server

Pallet Installation Procedure

Follow these steps to attach the caster wheels when the server is on the pallet.

1. Unpack the shipping carton, removing the accessory tray and pedestal kit box.

2. Unfold the bottom tray. See Figure 2-1

Figure 2-1 Server on Pallet

Side Bottom Foam Cushion (one on

each side)

Front and Rear Bottom End Foam

Cushions

Bottom Tray

3. Carefully, pull out the Side Bottom Foam Cushions from the right and left sides, and set

aside for later use. See Figure 2-1

4. Pull out the Ramp, and set aside for later use. See Figure 2-2.

Installing the Caster Wheels 9