HP Insight Management WBEM Providers on Integrity Servers Data Sheet

9BSEL Record Log 101
Table 10-2 Class: HP_CommonRecordLog Properties
Property name Property implementation
OperationalStatus OperationalStatus[0] indicates the highest severity of
IPMI SEL log entries and will contain one of the
following:
• 2 (OK), only informational or repaired events exist
in the IPMI SEL log
• 3 (Degraded), at least one degraded event exists in
the IML log
• 6 (Error), at least one critical event exists in the
IPMI SEL log
StatusDescriptions StatusDescriptions[0] will contain one of the following
corresponding to OperationalStatus[0]:
• Local SEL log status is OK
• Local SEL log status is DEGRADED
• Local SEL log status is FAILED
• 5 (OK), when OperationalStatus[0]=2 (OK)
HealthState
• 10 (Degraded), when OperationalStatus[0]=3
(Degraded)
• 20 (Major Failure), when OperationalStatus[0]=6
(Error)
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledState 2 (Enabled)
RequestedState 5 (No Change)
EnabledDefault 2 (Enabled)
CIM_Log
MaxNumberOfRecords 0 (Indicates variable length records)
Total number of filtered SEL events that affects the
system or partition. Filtered events are the events
with alert level 3 or above.
(HPQ_CommonLogEntry instances)
CurrentNumberOfRecords
LogState 2 (Normal)
OverwritePolicy 2 (Wraps When Full) The IML entries will fill up
available IML non-volatile memory space until no room
is left. The oldest log entries will then be deleted as
needed to create room for new log entries.
CIM_RecordLog
InstanceID HPQ:HPQ_CommonRecordLog
HP_CommonRecordLog
TimeOfLastChange Time of last log change
Date and time, when the log was cleared
recently.
LastLogClearedTime