HP Insight Management WBEM Providers on Integrity Servers Data Sheet

5BSystem Temperature Sensor 60
Table 6-2 Class: HP_NumericSensor
Property name Property implementation
Description Temperature Sensor n detects for NumericSensorType.
StatusDescription.
n represents the number of the temperature sensor
instance, NumericSensorType represents the value of
NumericSensorType and StatusDescription represents
the value of StatusDescriptions[0]
ElementName Temperature Sensor n, where n represents the number
of the temperature sensor instance.
CIM_ManagedSystemElement
• 2 (OK)—if temperature reported by the sensor is
within normal operating range;
OperationalStatus[0]
• 2 (OK)—if temperature reported by the sensor has
exceeded its non-critical threshold and has set fans
to full speed;
• 6 (Error)—if temperature reported by the sensor has
exceeded its threshold and the system is gracefully
shutting down
• Temperature reported by the sensor is within
normal operating range—if temperature reported
by the sensor is within normal operating range;
StatusDescriptions[0]
• Temperature reported by the sensor has exceeded
its non-critical threshold and the fans have been set
to full speed—if temperature reported by the sensor
has exceeded its threshold and has set fans to full
speed;
• Temperature reported by the sensor has exceeded
its threshold and the system is gracefully shutting
down—if OperationalStatus is 6 (Error)
• 5 (OK)—if OperationalStatus[0] value is 2 (OK);
HealthState
• 20 (Major Failure)—if OperationalStatus[0] value is
6 (Error)
Name Temperature Sensor n, where n represents the number
of the temperature sensor instance.
CIM_LogicalDevice
CreationClassName HP_WinNumericSensor
DeviceID Unique identifier for this temperature sensor instance.
SystemCreationClassName HP_ComputerSystem.CreationClassName
SystemName HP_ComputerSystem.Name
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
CIM_Sensor