HP Insight Management WBEM Providers on Integrity Servers Data Sheet

6BSystem memory 72
Table 7-8 Class: HP_MemoryRedundancySet
Property name Property implementation
RedundancyStatus The current memory redundancy status as follows:
• 2 (Fully Redundant)—System is operating properly
in the Advanced Memory Protection mode given in
the TargetConfiguration property.
• 3 (Degraded Redundancy)—Degraded
Redundancy can occur in either of 2 conditions:
○ System is not operating in the
TargetConfiguration mode (the
CurrentConfiguration mode does not match the
TargetConfiguration mode).
○ System is operating in the TargetConfiguration
mode but memory module(s) have correctable
errors exceeding the condition for pre-failure
warranty.
HP_MemoryRedundancySet
OperatingSpeed The current operating speed of the advanced memory
protection subsystem in MHz
AvailableMemory The size of the memory as seen by the operating
system in MB
TotalMemory Total size of memory as seen by the operating system
and memory used for advanced memory protection
configurations in MB
CurrentConfiguration The current operating mode of the Advanced Memory
Protection system. The value in this property
corresponds to the value populated in the property
TypeOfSet[0].
• Advanced ECC, when the system is operating in
Advanced ECC mode
• RAID, when the system is operating in RAID (XOR)
mode
• Mirrored, when the system is operating in Mirrored
mode
• Online Spare, when the system is operating in
Online Spare mode
TargetConfiguration The desired or targeted mode of the Advanced
Memory Protection system.
• Advanced ECC, when the system is configured for
Advanced ECC mode
• RAID, when the system is configured for RAID
(XOR) mode
• Mirrored, when the system is configured for
Mirrored mode
• Online Spare, when the system is configured for
Online Spare mode