HP Insight Manager WBEM Provider Events Reference

Event DescriptionEvent SeverityEvent ID
Bulk power supply (BPS) redundancy has been lost on one or more row(s) of power
supplies in the complex. The further loss of a single BPS or an AC grid will most
likely result in the shutdown of partitions. Probable Cause: An AC source has been
lost. Recommended Action: Verify that the chassis is connected to working power
grid(s). WBEM EventID: 7253. WBEM ProviderName: FPL_IndicationProviderError12589
AC redundancy has been lost on one or more power supplies in the complex. The
further loss of a single Bulk Power Supply (BPS) or the other AC grid will most likely
result in the shutdown of partitions. Probable Cause: A configuration change has
been made to the system that changes the amount of power used. Recommended
Action: Relook at the configuration changes. WBEM EventID: 7255. WBEM
ProviderName: FPL_IndicationProviderError12591
The fans that cool a region of the system are not redundant. If an additional fan fails
or is removed from this cooling domain, the partitions on this system will be shut
down to prevent damage. Probable Cause: One or more fans in the cooling domain
have been removed or are not functioning properly. Recommended Action: Removed
failed fan (if any) and insert working fan. WBEM EventID: 7256. WBEM
ProviderName: FPL_IndicationProviderError12593
An insufficient number of fans are working in a cooling domain to permit system
operation. Running partitions will be shut down immediately to prevent damage
due to excessive heat. Probable Cause: More than one fan in a cooling domain have
been removed or are not functioning properly. Recommended Action: Remove failed
fan(s), if any, and insert working fans. WBEM EventID: 7258. WBEM ProviderName:
FPL_IndicationProviderError12595
Operating system is not using all available processors for the current system. Probable
Cause: Operating system license doesn't allow all processors to be used, or some
processors are disabled / deconfigured. Recommended Action: Verify the correct
operating system license to be used; Verify if all processors are enabled.Warning12627
HP Event Sync Events
Source in Windows Event Log: HpInsightMgmtProvs
Event DescriptionEvent SeverityEvent ID
%1 The service version %2 has started. %3 %1 - "[component name]" %2 - "version"
%3 - "See log file for details."
Success100
%1 The service version %2 has started. %3 %1 - "[component name]" %2 - "version"
%3 - "See log file for details."
Success100
%1 The service has stopped. %2 %1 - "[component name]" %2 - "See log file for details."Informational101
%1 The service has stopped. %2 %1 - "[component name]" %2 - "See log file for details."Informational101
%1 Failed to initialize service: %2. %3 %1 - "[component name]" %2 - "error code" %3
- "See log file for details."
Error106
%1 Failed to initialize service: %2. %3 %1 - "[component name]" %2 - "error code" %3
- "See log file for details."
Error106
%1 An exception occurred: %2. %3 %1 - "[component name]" %2 - "exception error
message" %3 - "See log file for details."
Warning108
%1 File access failure: %2. %3 %1 - "[component name]" %2 - "Error reading from
softlog file" %3 - "See log file for details.
Error118
%1 File access failure: %2. %3 %1 - "[component name]" %2 - "Failed to get the
evtLogIgnFlt.cfg path" %3 - "See log file for details.
Error118
%1 File access failure: %2. %3 %1 - "[component name]" %2 - "Error opening softlog
file" %3 - "See log file for details.
Error118
HP Event Sync Events 103