HP Integrity rx7620 Server - User Service Guide, Sixth Edition

3. Lift the cover up and away from the chassis.
Replacing the Top Cover
To replace the top cover, follow these steps:
1. Slide the cover into position. It should easily slide into position. Use a slow firm pressure
to properly seat the cover.
2. Tighten the retaining screws to secure the cover to the chassis.
Removing and Replacing a Side Cover
It is necessary to remove and replace one or both of the side covers to access the components
within the server chassis.
CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to
follow ESD safety precautions can result in damage to the server.
Figure 6-4 Side Cover Locations
Removing a Side Cover
To remove the side cover, follow these steps:
Removing and Replacing a Side Cover 101