HP Integrity rx7620 Server - User Service Guide, Sixth Edition

Removing and Replacing a Disk Drive
The disk drives are located in the front of the chassis. You must shut down the nPartition to
remove or replace the drive that serves as the boot disk, if the boot disk is not mirrored. For more
information, see “Shutting Down nPartitions and Powering Off Hardware Components ”
(page 96). The remainder of the internal disk drives are hot pluggable.
CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to
follow ESD safety precautions can result in damage to the server.
Figure 6-7 Disk Drive Location
Removing a Disk Drive
Figure 6-8 Disk Drive Detail
To remove the disk drive, follow these steps:
Removing and Replacing a Disk Drive 103