HP Integrity rx7620 Server - User Service Guide, Sixth Edition

2. Disengage the cables from the rear of the CD/DVD/DAT.
3. Remove the rails and clips from the drive.
4. Slide the drive from the chassis.
Replacing a CD/DVD/DAT Drive
To replace the CD/DVD/DAT drive, follow these steps:
1. Attach the rails and clips to the drive.
2. Connect the cables to the rear of the CD/DVD/DAT.
3. Slide the drive into the chassis.
CAUTION: Before attempting to install the drive into the chassis, position the data cable
over the top of the drive to avoid pinching the cable during installation.
4. The drive easily slides into the chassis. Use a slow firm pressure to properly seat the drive.
Removing and Replacing a Front Smart Fan Assembly
The front smart fan assembly is located in the front of the chassis. The fan assembly is a
hot-swappable component.
CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to
follow ESD safety precautions can result in damage to the server.
Figure 6-11 Front Smart Fan Assembly Locations
106 Removing and Replacing Components