HP Integrity rx7620 Server - User Service Guide, Sixth Edition

CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to
follow ESD safety precautions can result in damage to the server.
Figure 6-23 PCI OLR Assembly Location
Removing the PCI OLR Assembly
Figure 6-24 PCI MRL Detail
NOTE: It is highly recommended that extra PCI MRLs are available, as these may be easily
broken during removal or replacement.
To remove a PCI OLR assembly, follow these steps:
1. Shut down the system and remove all power cables.
2. Remove the top and right side covers.
3. Remove the PCI access panel.
4. Disconnect the PCI OLR cable from the PCI OLR assembly. The connector is located on the
cell board side of the system. Take note of the connector orientation and polarity.
5. Flip all PCI MRL to the OPEN position.
Removing and Replacing the PCI OLR Assembly 117