HP Integrity rx7620 Server - User Service Guide, Sixth Edition

Removing and Replacing the Mass Storage Backplane
CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to
follow ESD safety precautions can result in damage to the server.
Removing the Backplane
To remove a backplane, follow these steps:
1. Shut down and power off the server.
2. Remove all internal disks.
Figure 6-31 Locating Internal Disks
3. Remove the top and right side covers.
4. Remove the PCI access panel.
5. Disconnect all cables from the backplane. Label each connector and take note of routing so
that they can be correctly reinstalled.
124 Removing and Replacing Components