HP Integrity rx7620 Server - User Service Guide, Sixth Edition

Removing a Cell Board
Figure 6-38 Cell Board Detail
NOTE: The cell board weighs 27.8 lb. Support both side edges while removing the cell board
from the chassis.
To remove a cell board, follow these steps:
1. Power off the cell board, using the MP command menu PE command.
2. Remove the right side cover.
3. Verify that the power LED located on the left side of the cell board is off before removing
the cell board.
Figure 6-39 Cell LEDs
4. Press each extraction lever and move the slide to the unlocked position.
Removing and Replacing a Cell Board 129