HP Integrity rx7620 Server - User Service Guide, Sixth Edition

1. Run the Onboard Scan Programming Utility to upgrade / downgrade the new Cell FPGA
to match the version on the other cells.
MP:CM> osp
When prompted, enter the following information:
Enter the Entities to be upgraded (Ex: 2,4,7): (1)
Enter your user name: (2)Enter your user password: (3)
Enter the ip address where the FPGA image file can be found: (4)
Enter the path where the file(s) can be found: (5)
Enter PDHC FPGA image filename: (6)
Are you sure that you want to continue (Y/N): y
(1) Select the appropriate entity corresponding to the replacement cell to be upgraded /
downgraded by entering the number from the first column of the OSP table.(2) Enter your
user name. (3) Enter account password.(4) Enter the ip address of the anonymous FTP server
where the firmware images reside.(5) Enter the directory path. For example:
/dist/version3_0 (or some other location). Do not list the actual firmware image
filename.(6) Enter the filename. For example: pdhc_1.7.0.osp
Example
MP:CM> osp
*********************************************************************
***** *****
***** Onboard Scan Programming Utility *****
***** *****
***** (C) Copyright 2001 Hewlett-Packard Company *****
***** All Rights Reserved *****
***** *****
***** THIS PROGRAM IS NOT LICENSED TO CUSTOMERS *****
***** *****
***** This program is intended for use by trained HP support *****
***** personnel only. HP shall not be liable for any damages *****
***** resulting from unauthorized use of this program. This *****
***** program is the property of HP. *****
***** *****
***** Version 1.03 *****
***** *****
*********************************************************************
Flash Current
Number Cabinet Name Partition Handle FPGA Version
------ --------- -------- ---------- -------- --------------
1 0 CIO 0 0 2048 2.008
2 0 CIO 1 1 2049 2.008
3 0 GPM 0 2184 1.002
4 0 FM 0 2192 1.002
5 0 OSP 0 2232 1.002
6 0 Pci HS 0 2328 1.000
7 0 PciXLPM 0 2352 2.000
(2) 8 (1) 8 CIO 0 0 34816 2.008
(2) 9 (1) 8 CIO 1 1 34817 2.008
(2) 10 (1) 8 GPM 0 34952 1.002
(2) 11 (1) 8 FM 0 34960 1.002
(2) 12 (1) 8 OSP 0 35000 1.002
(2) 13 (1) 8 Pci HS 0 35096 1.000
(2) 14 (1) 8 PciXLPM 0 35120 2.000
15 0 PDHC 0 0 2472 1.007
16 0 CLPM 0 0 2480 1.002
17 0 PDHC 1 1 2473 1.007
18 0 CLPM 1 1 2481 1.002
(2) 19 0 PDHC 2 0 2474 1.007
(2) 20 0 CLPM 2 0 2482 1.002
(2) 21 0 PDHC 3 1 2475 1.007
(2) 22 0 CLPM 3 1 2483 1.002
Enter the Entities to be upgraded (Ex: 2,4,7) : 15
Enter your user name: anonymousEnter your user password: ********
Enter the ip address where the FPGA image file can be found: 192.1.1.1
Enter the path where the file(s) can be found: /dist/versionX_X
Enter PDHC FPGA image filename: pdhc_X.X.X.osp (Refer to Note (3) in this step)
Are you sure that you want to continue(Y/N): y
**** Updating PDHC FPGA ****
Removing and Replacing a Cell Board 133