HP Integrity rx7620 Server - User Service Guide, Sixth Edition
FPGA MP
------- -------
IOX Master Core IO : 2.009 A.006.012
Event Dict. 0.009
IOX Slave Core IO : 2.009 A.006.012
Event Dict. 0.009
11. After resetting the firmware, verify the firmware and programmable hardware revisions
again using the sysrev command. If all versions are now correct, continue to step 12. If not
correct, run dfw, fw or osp again to copy or download the correct firmware.
12. Reset the partition using the rs command:
MP:CM> rs
This command resets the selected partition.
WARNING: Execution of this command irrecoverably halts
all system processing and I/O activity and restarts the
selected partition.
Part# Name
----- ----
0) Partition 0
1) Partition 1
Select a partition number: 0 (or 1)
Upgrading Using the DFW Command
If problems are encountered during the firmware update procedure, it might be necessary to use
the MP DFW command. The DFW command can be used to copy a PDHC or a system firmware
image from one cell to another.
NOTE: The steps for upgrading using the DFW command are the same as listed in “Upgrading
Using the FW Command” (page 132):
1. To upgrade the newly added cell using the DFW command, follow these steps:
1. OSP the PDHC FPGA image to the new cell.
2. To copy the PDHC image to the new cell, use DFW.
3. AC power cycle the cell
4. To copy the System Firmware image to the new cell, use DFW.
2. Perform step 1 from Step 1 and step 2 from Step 2.
Do not reset the cell until the next step (step 3) is completed.
3. Example (To upgrade the PDHC firmware):
MP:CM> dfw
*********************************************************************
***** *****
***** Duplicate Firmware Utility *****
***** *****
***** (C) Copyright 2001 Hewlett-Packard Company *****
***** All Rights Reserved *****
***** *****
***** THIS PROGRAM IS NOT LICENSED TO CUSTOMERS *****
***** *****
***** This program is intended for use by trained HP support *****
***** personnel only. HP shall not be liable for any damages *****
***** resulting from unauthorized use of this program. This *****
***** program is the property of HP. *****
***** *****
***** Version 1.04 *****
***** *****
*********************************************************************
Removing and Replacing a Cell Board 139