HP Integrity rx7620 Server - User Service Guide, Sixth Edition

5. Tighten the screw. See Figure 6-44.
Figure 6-44 Door Opener Installed
Figure 6-45 VRM Cover, Door Opener, and DIMM Cover Installed
6. Install the cell board into the server.
7. Replace the right side cover.
8. Power on the server. For more information, see “Shutting Down nPartitions and Powering
Off Hardware Components ” (page 96).
9. Power on the nPartition. See Appendix D.
10. To verify proper operation of the cell board, use the info cpu command from the EFI Shell.
Installing the VRM Cover (AB388-00002) and Door Opener (AB388-00003) 145