HP Integrity rx7620 Server - User Service Guide, Sixth Edition

Figure 6-47 CPU Cover Raised
10. Identify the CPUs to be removed.
11. Disconnect the CPU power pod cable connector from its connector on the cell board.
12. Disconnect the turbo-cooler fan cable from the cell board.
Figure 6-48 CPUs with Turbo-Cooler Fans
13. Loosen the four T15 heat-sink screws and the four turbo-cooler load screws. Loosen these
screws in an X pattern, rotating each screw two to three turns until all screws are loose from
the cell board.
14. Push the load screw sequencer toward the fan.
Removing and Replacing a Central Processing Unit 147