HP Integrity rx7620 Server - User Service Guide, Sixth Edition

(c) Copyright 1990-2002, Hewlett Packard Company.
All rights reserved
HP-UX Boot Loader for IA64 Revision 1.723
Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot - 9
6. Exit the console and service processor interfaces when finished using them.
To exit the EFI environment, enter ^B (Control-B). This exits the nPartition console and
returns to the service processor Main Menu. To exit the service processor, enter X at the
Main Menu.
Single-User Mode HP-UX Booting
You can boot HP-UX in single-user mode by using the following procedure:
Procedure D-3 Single-User Mode HP-UX Booting [EFI Shell]
From the EFI Shell environment, boot in single-user mode by stopping the boot process at the
HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>) entering the boot -is vmunix
command.
For required configuration details, see “ACPI Configuration for HP-UX Must Be “default””
(page 207).
1. Access the EFI Shell environment for the nPartition on which you want to boot HP-UX in
single-user mode.
Login to the service processor (MP or GSP) and enter CO to access the console list. Select the
nPartition console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main
EFI menu). If at another EFI menu, select Exit from the sub-menus until you return to the
screen with the EFI Boot Manager heading.
From the EFI Boot Manager menu, select the EFI Shell menu option to access the EFI
Shell environment.
2. Access the EFI System Partition (fsX: where X is the filesystem number) for the device
from which you want to boot HP-UX.
3. When accessing the EFI System Partition for the desired boot device, issue the HPUX command
to invoke the \EFI\HPUX\HPUX.EFI loader on the selected devive.
4. Boot to the HP-UX Boot Loader prompt (HPUX>) by pressing any key within the ten seconds
given for interrupting the HP-UX boot process. You will use the HPUX.EFI loader to boot
HP-UX in single-user mode in the next step.
After you press a key, the HPUX.EFI interface (the HP-UX Boot Loader prompt, HPUX>) is
provided. For help using the HPUX.EFI loader, enter the help command. To return to the
EFI Shell, enter exit.
fs0:\> hpux
(c) Copyright 1990-2002, Hewlett Packard Company.
All rights reserved
HP-UX Boot Loader for IA64 Revision 1.723
Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot - 9
[User Types A Key to Stop the HP-UX Boot Process and Access the HPUX.EFI Loader ]
Type ’help’ for help
HPUX>
Booting HP-UX 209