HP Integrity rx7620 Server - User Service Guide, Sixth Edition

5. Pull the string plunger out, move the handles apart, and install the shoulder washer end of
the panel into the keyway feature.
Figure 2-11 Lift Handles Mounted
6. Continue to pull the handles apart until the spring plunger snaps into final position. The
spring plunger will drop down into the recess position.
7. Ensure that the handles are secure by pressing the handles together and moving back and
forth.
8. Repeat steps above for the other handle.
9. To lift the server, rotate the handles 90 degrees to horizontal position.
NOTE: If installing the server in a rack, see the Installation Guide, HP J1530B, Rack Installation
Kit.
10. After moving the server, remove the lift handle panels from the chassis and reinstall the
server covers and front bezel. See the Installation Guide, HP J1530B, Rack Installation Kit.
Installing the Server Into the Rack
Any server that is to be installed into a rack is shipped with equipment slides. With every set of
slides comes an installation guide: Installation Guide, HP J1530B, Rack Installation Kit.
Installing the Server Into the Rack 39