HP Integrity rx7620 Server - User Service Guide, Sixth Edition

Figure 3-13 SCSI and Power Cable Routing
17. Slide the DVD+RW drive and cable into the removable media drive bay. Push the drive until
it is fully seated in the bay.
18. Replace the front bezel and top cover. See “Removing and Replacing the Front Bezel”
(page 99) and see “Removing and Replacing the Top Cover” (page 99) .
19. Power on the server.
20. Boot the operating system.
21. Install the appropriate device drivers. Use the installation instructions that come packaged
with the drive to install device drivers.
54 Installing Additional Components