HP Integrity rx7620 Server - User Service Guide, Sixth Edition

When power is first applied. The BPS LEDs flash amber.•
• After 30 seconds has elapsed. The flashing amber BPS LED for each BPS becomes a
flashing green LED.
To interpret LED indicators, see power cord policies.
3. Log in to the MP:
a. Enter Admin at the login prompt. The login is case sensitive.
It takes a few moments for the MP prompt to display. If it does not display, check that
the laptop serial device settings are correct: 8 bits, no parity, 9600 baud, and na for both
Receive and Transmit. Then, try again.
b. Enter Admin at the password prompt. The password is case sensitive.
The MP Main Menu displays:
Figure 4-8 MP Main Menu
Configuring LAN Information for the MP
To set the MP LAN IP address, follow these steps:
1. At the MP Main Menu prompt (MP>), enter cm. From the MP Command Menu prompt
(MP:CM>), enter lc (for LAN configuration).
The default values display, and a prompt, asking if default values are to be modified, displays.
It is a good idea to write down the information, because it might be required for future
troubleshooting.
NOTE: If the Command Menu is not shown, enter q to return to the MP Main Menu, then
enter cm.
Enter lc and press Return. The following screen displays:
MP Core I/O Connections 63