Installation Guide, Seventh Edition - HP Integrity rx7620 Servers

Chapter 3

Installing Additional Components

Wheel Kit Installation

NOTE The caster covers are designed to fit on either side of the server.

16. Insert the slot on the caster cover into the front caster. Secure the cover to the server by tightening the

captive screw on the cover at the rear of the server.

Figure 3-6 Securing Each Caster Cover to the Server

17. Wheel kit installation is complete when both caster covers are attached to the server, and the front bezel

and all covers are installed.

MWK006

3/11/03

Rear Casters

Front Casters

Caster Cover