Installation Guide, Seventh Edition - HP Integrity rx7620 Servers

Chapter 3

Installing Additional Components

DVD+RW Installation Instructions

Step 16. Connect the SCSI cable to the DVD+RW dive. Ensure that the power cable passes over the top of

the SCSI cable.

Figure 3-13 SCSI and Power cable routing

Step 17. Slide the DVD+RW drive and cable into the removable media drive bay. Push the drive until it is

fully seated in the bay.

Step 18. Replace the front bezel and top cover. See “Replacing the Front Bezel” and Replacing the Top

Cover” in the Remove and Replace Procedures.

Step 19. Power on the server.

Step 20. Boot the operating system. See “Powering On the System” in the Remove and Replace Procedures.

Step 21. Install the appropriate device drivers. Use the installation instructions that come packaged with

the drive to install device drivers.