Site Preparation Guide, Fourth Editon - HP Integrity rx7620 Server

Appendix B
General Site Preparation Guidelines
Computer Room Layout Plan
49
Computer Room Layout Plan
Use the following procedure to create a computer room layout plan:
1. Remove the floor plan grid from the document. See Figure B-4.
2. Remove a copy of each applicable equipment footprint template. See Figure B-3.
3. Cut out each template selected in 2, then place it on the floor plan grid.
4. Position the pieces until the desired layout is obtained, then fasten the pieces to the grid. Mark locations
of computer room doors, air conditioning floor vents, utility outlets, and so on.