SmartSetup Scripting Toolkit Deployment Guide for HP Integrity Servers with Windows Server 2003 and Windows Server 2008 for Itanium-based Systems

Table 6-2 hpacubin Error Codes (continued)
ReasonErrorCode
The specified Resource Volume Owner is not valid. The Resource
Volume Owner should be a valid existing logical drive ID.
Invalid Resource Volume
Owner
2859
The Resource Volume owner cannot be changed if it is a
configured logical drive.
Cannot change Resource
Volume Owner
2860
The controller is not redundant or does not support redundancy
settings.
Controller does not support
redundancy settings
2861
The preferred path mode is not a valid preferred path mode or
the controller is not available.
Invalid Preferred Path Mode
2864
The preferred path specified is not a valid chassis-slot for an
available active controller or the controller is not available.
Invalid Preferred Path
2865
Error opening capture file.
Failure opening capture file
'%s'
2866
Error opening input file.
Failure opening input file
'%s'
2867
Error opening error file.
Failure opening error file
'%s'
2868
The specified command is missing or in the incorrect place in
the file.
‘%s’ command expected
2869
The specified command is not a valid scripting command.
'%s' is not a supported
command
2870
The specified command does not belong in the Controller section
of the script file.
'%s' is not a Controller
command
2871
The specified command does not belong in the Array section of
the script file.
'%s' is not an Array command
2872
The specified command does not belong in the LogicalDrive
section of the script file.
'%s' is not a Logical Drive
command
2873
A command found in the HBA section is not a valid command
for this section.
’%s' is not an HBA command
2874
The specified command is used more than once in the same
section. It should only be used once per section.
More than one '%s' command
cannot exist in the same
section
2875
Invalid Physical Drive count. A possible reason is that more disks
were requested than available of the current DriveType.
Invalid Physical Drive Count
2876
No suitable Spares available.
No Spares Available
2877
Spares are not supported in RAID0-only Arrays.
Spare Request for RAID0 is
Invalid
2878
Mode is Reconfigure and a controller reset with data loss was
specified.
Reset and Reconfigure
combined Error
2879
Invalid Disk Type specified.
Invalid Drive Type Specified
2880
52 Utilities reference