SmartSetup Scripting Toolkit Deployment Guide for HP Integrity Servers with Windows Server 2003 and Windows Server 2008 for Itanium-based Systems

hpqlarep
Synopsis
hpqlarep [/l] [/s] [filename]
Description
The hpqlarep utility enables or disables the EFI or BIOS boot setting on QLogic 2 GB or 4 GB
HBAs.
Options
/l filename Loads the boot parameters specified in filename.
/s filename Saves the boot parameters to filename.
Format
The configuration file has the following fields:
DescriptionFormat
Section for each HBA. The HBA number.
[HBA0]
Read-only variable. The HBA WWPN.
WWID=11223344
Input from customer. 1 (enable) or 0 (disable).
1
SelectiveLogin=1
Input from customer. 1 (enable) or 0 (disable).
1
EnableSelectiveLUN=1
Input from customer. Boot device node name.
BootDeviceWWNN=0000000000000000
Input from customer. Boot device port name.
2
BootDeviceWWPN=0000000000000000
Input from customer. Boot device LUN ID.
BootDeviceLUN[0]=0
1
If SelectiveLogin and EnableSelectiveLUN are both set to 0, the utility automatically clears the
BootDeviceWWNN, BootDeviceWWPN, and BootDeviceLUN (EFI database entries.
2 Not required for a 4 GB HBA.
Error Codes
Table 6-4 hpqlarep error codes
DescriptionValue
Success0
Invalid command line option1
File open error2
NVRAM checksum error3
NVRAM data error4
No adapter found; no QLogic HBA found on this host.5
Error getting I/O address6
Invalid WWID7
Invalid boot LUN settings8
Invalid EFI enable selective LUN settings9
Invalid BIOS enable settings10
58 Utilities reference