Windows Integrity HP Smart Update Manager User Guide

component in the installation set, you must select the
component.
Updates to be Installed Components in this section can be installed on your system.
Status field
Figure 2-7 Status Field
The Status field of the Select Items to be Installed screen displays information about whether the
installation is ready to proceed or not.
DescriptionTextIcon
All selected components are ready to be installed.Ready
No component installation is required.Already
up-to-date
No components are selected for installation.None Selected
x components are not ready for installation due to failed dependencies, where x is the
number of components. The installation cannot proceed until the dependencies are met or
the component is deselected for installation.
x Critical
Action
Reboot field
The Reboot section of the Select Items to be Installed screen enables you to specify preferred
reboot behavior.
Figure 2-8 Reboot field
To instruct the system to reboot after updates are installed:
1. Click Reboot System After Installation.
2. Click Always or If Needed.
If you select Always, the system always reboots unless there is a component installation failure.
If you select If Needed, the system reboots if needed by at least one component unless there is
a component installation failure.
To change the delay before reboot or the reboot message, click Reboot Options. The Set Reboot
Options screen appears.
Using the GUI: local host installations 19