HP Insight Management WBEM Provider Events Reference Guide

Event DescriptionEvent
Severity
Event ID
%1 An exception occurred: %2. %3%1 - "[component name]"%2 - "exception error
message"%3 - "See [log file] for details."
Warning108
%1 The %2 service was finished unexpectedly. %3%1 - "[component name]"%2 -
"service name"%3 - "See [log file] for details.”
Error111
%1 Could not register with the Service Control Manager. %2%1 - "[component
name]"%2 - "See [log file] for details.”
Error113
%1 Could not set the service status with the Service Control Manager. %2%1 -
"[component name]"%2 - "See [log file] for details.”
Error114
%1 File access failure: %2. %3%1 - "[component name]"%2 - "Error reading from
softlog file"%3 - "See [log file] for details.”
Error118
%1 IPMI initialization failure. %2%1 - "[component name]"%2 - "See [log file] for
details."
Error120
%1 An IPMI communication error occurred: %2. %3%1 - "[component name]"%2 -
"error code"%3 - "See [log file] for details.”
Error121
%1 WMI usage error. %2%1 - "[component name]"%2 - "See [log file] for details.”Error126
%1 Error processing notified %2 event. %3%1 - "[component name]"%2 - "FPL"%3 -
"See [log file] for details."
Error129
%1 Error processing notified %2 event. %3%1 - "[component name]"%2 - "SEL"%3 -
"See [log file] for details."
Error129
HP BMC IPMI Driver Events
Source in Windows Event Log: hpipmi
Event DescriptionEvent
Severity
Event ID
During communication with the IPMI BMC device, the system detected that the BMC
entered an error state. The driver attempted to set the BMC state to a working state
but failed to do so. After 20 successive attempts, the driver has set the IPMI device
to a non working state. It is recommended that you seek assistance from
Hewlett-Packard. You can return the device instance to the working state by disabling
and enabling the IPMI device instance labeled Hewlett-Packard IPMI Device. You
can locate the IPMI device instance within the Device Manager user interface.
Error1000
A IPMI device was not recognized or detected, the IPMI device driver was not loaded.Error1001
The IPMI driver read a registry parameter that was invalid, the driver used a default
value for the registry parameter
HKLM\SYSTEM\CurrentControlSet\Control\IPMI\%2.
Warning1002
The IPMI device driver attempted to communicate with the IPMI BMC device during
device creation. However the communication failed due to a timeout. Either the
configured timeouts are too small and the IPMI BMC device responses take longer
than the timeouts or the BMC has a technical fault. You can increase the timeouts
associated with the IPMI device driver.
Error1003
The IPMI device driver attempted to communicate with the IPMI BMC device during
normal operation. However the communication failed due to a timeout. You can try
increasing the timeouts associated with the IPMI device driver located in the registry
at
HKLM\SYSTEM\CurrentControlSet\Control\IPMI\CommandWaitTimeoutPeriod,
between 5000000 (5 seconds) to 30000000 (30 seconds), the default is 10 seconds.
Error1004
\Device\CpqHlth, The Hewlett Packard IPMI device driver was loaded.Information2000
112 WBEM Provider Event Tables