HP Insight Management WBEM Provider Events Reference Guide

Event DescriptionEvent
Severity
Event ID
Trap taken. Probable Cause: A trap has been taken. Recommended Action: Reboot
or update System FW. If problem persists contact your HP representative for support.
WBEM EventID: 258. WBEM ProviderName: FPL_IndicationProvider.Error5102
Uncleared interrupt. Probable Cause: At least one interrupt was not cleared.
Recommended Action: No action is required. WBEM EventID: 259. WBEM
ProviderName: FPL_IndicationProvider.Warning5103
Unexpected external interrupt. Probable Cause: An unexpected external interrupt
has occurred. Recommended Action: Reboot or update System FW. If problem persists
contact your HP representative for support. WBEM EventID: 260. WBEM
ProviderName: FPL_IndicationProvider.Error5104
Interrupt before redirection table set up. Probable Cause: An interrupt has occurred
before setting up the Interrupt Vector Table. Recommended Action: Reboot, if problem
persists contact your HP representative for support. WBEM EventID: 261. WBEM
ProviderName: FPL_IndicationProvider.Error5105
CPU unexpected MCA. Probable Cause: Unexpected MCA. Recommended Action:
Reboot or update System FW. If problem persists contact your HP representative for
support. WBEM EventID: 262. WBEM ProviderName: FPL_IndicationProvider.Error5106
Unexpected trap. Probable Cause: An unexpected trap has occurred. During System
Firmware boot time this indicates the system has requested a trap that firmware has
not registered. During OS run time it indicates the system has requested a trap that
is not recognized in the OS's trap table. Recommended Action: If at FW boot time,
reboot or upgrade System FW. If problem persists contact your HP representative
for support. If at OS run time, verify that the OS has properly installed its trap handler,
and that only valid traps are caused. Investigate what could cause the trap that is
signaled by the event or why the OS has not properly installed the trap handler. If
problem persists contact your HP representative for support. WBEM EventID: 263.
WBEM ProviderName: FPL_IndicationProvider.Error5107
CPU unknown boot error. Probable Cause: Unknown error. Recommended Action:
Reboot or update System FW. If problem persists contact your HP representative for
support. WBEM EventID: 264. WBEM ProviderName: FPL_IndicationProvider.Error5108
CC errors PAL failure. Probable Cause: SFW has detected a PAL Failure.
Recommended Action: Reboot, update SFW if necessary, if problem persists contact
your HP representative for support. WBEM EventID: 265. WBEM ProviderName:
FPL_IndicationProvider.Warning5118
Expected MC vector unregistered. Probable Cause: Expected Machine Check Vector
not registered at the time of an Expected Machine Check. Recommended Action:
Contact HP support to troubleshoot the problem. WBEM EventID: 266. WBEM
ProviderName: FPL_IndicationProvider.Warning5119
INIT initiated. Probable Cause: Software has requested an INIT or the INIT button
has been pressed. Recommended Action: No action is required. WBEM EventID: 267.
WBEM ProviderName: FPL_IndicationProvider.Error5121
Expected I/O host bridge is missing. Probable Cause: I/O host bridge failure. An
incorrect I/O backplane is installed. Recommended Action: Contact your HP
representative to check the I/O host bridge and the I/O backplane. WBEM EventID:
268. WBEM ProviderName: FPL_IndicationProvider.Warning5123
LBA has unexpected number of I/O slots. Probable Cause: The firmware needs to be
updated. An incorrect I/O backplane is installed. Recommended Action: Contact
your HP representative to check the firmware and the I/O backplane. WBEM EventID:
269. WBEM ProviderName: FPL_IndicationProvider.Warning5124
I/O rope width does not match expected value. Probable Cause: The firmware needs
to be updated. An incorrect I/O backplane is installed. Recommended Action: Update
SFW. If problem persists, contact your HP representative to check the I/O backplane.
WBEM EventID: 270. WBEM ProviderName: FPL_IndicationProvider.Warning5125
Platform Events 17