HP Insight Management WBEM Provider Events Reference Guide

An unexpected error occurred while setting up the Non-Coherent or Coherent tables
after an OLA. Data field: return value from SetupNCTable() or SetupCohTable().
Probable Cause: An error occurred while routing the fabric. Recommended Action:
Collect IPMI event logs, and contact your HP support representative to inspect the
fabric and system firmware. WBEM EventID: 4950. WBEM ProviderName:
FPL_IndicationProvider.Warning11586
ArfRouteEnable() returned an unexpected error while enabling routes to the local
cell. Data field: (local cell number 56) | (bitmap of routes to enable). Probable Cause:
An error occurred while routing the fabric. Recommended Action: Collect IPMI event
logs, and contact your HP support representative to inspect the fabric and system
firmware. WBEM EventID: 4951. WBEM ProviderName: FPL_IndicationProvider.Warning11597
ArfRouteDiable() returned an unexpected error while disabling routes during an
OLA operation. Data field: (bitmap of cells 32) | (bitmap of routes to disable). Probable
Cause: An error occurred while routing the fabric. Recommended Action: Collect
IPMI event logs, and contact your HP support representative to inspect the fabric
and system firmware. WBEM EventID: 4952. WBEM ProviderName:
FPL_IndicationProvider.Warning11598
ArfRouteDiable() returned an unexpected error while disabling routes in ArfPhase4.
Data field: (bitmap of source cells 32) | (bitmap of routes to disable). Probable Cause:
An error occurred while routing the fabric. Recommended Action: Collect IPMI event
logs, and contact your HP support representative to inspect the fabric and system
firmware. WBEM EventID: 4953. WBEM ProviderName: FPL_IndicationProvider.Warning11599
SetupInitialCohTables() returned an error. Data field: (cell set 32) | (return value
from SetupInitialCohTables()). Probable Cause: An error occurred while routing the
fabric. Recommended Action: Collect IPMI event logs, and contact your HP support
representative to inspect the fabric and system firmware. WBEM EventID: 4978.
WBEM ProviderName: FPL_IndicationProvider.Warning11775
Stable store read or write to flash failed. Probable Cause: Soft error Flash part Failure.
Recommended Action: Reboot, if problem persists, contact HP support. WBEM
EventID: 5152. WBEM ProviderName: FPL_IndicationProvider.Warning11780
Error reading or writing the stable store NVM area. Probable Cause: A read/write to
the NVM stable storage area failed. Recommended Action: Reboot, if problem persists,
contact HP support. WBEM EventID: 5153. WBEM ProviderName:
FPL_IndicationProvider.Warning11783
FW has detected an illegal memory config using 4GB DIMMs. The system will be
halted. Probable Cause: An unsupported memory configuration with 4GB DIMMs
is installed in the system. Recommended Action: Refer to the user documentation to
determine the supported memory configurations with 4GB DIMMs. WBEM EventID:
5154. WBEM ProviderName: FPL_IndicationProvider.Error11784
SFW failed to allocate enough NVM to store all required data. Probable Cause: Not
enough space allocated to store all required data in NVM. Recommended Action:
Upgrade FW Contact HP support. WBEM EventID: 6857. WBEM ProviderName:
FPL_IndicationProvider.Warning11788
SFW failed to allocate enough SCR RAM to store all required data. Probable Cause:
SFW component does not allocate enough space in the SCR RAM for store it data.
Recommended Action: Update SFW. Contact your HP representative for support.
WBEM EventID: 6858. WBEM ProviderName: FPL_IndicationProvider.Warning11789
SetupIntialCohTables() returned an error in ArfPhase3. Data field: cell set [63:32],
return value [31:0]. Probable Cause: An error occurred while routing the fabric.
Recommended Action: Collect IPMI event logs, and contact your HP support
representative to inspect the fabric and system firmware. WBEM EventID: 5157.
WBEM ProviderName: FPL_IndicationProvider.Warning11797
Error writing the error masks for ALREC and ALTRAN. Data field: cell ID [63:56],
port num [55:44], XBC ID [43:32]. Probable Cause: An error occurred while routing
the fabric. Recommended Action: Collect IPMI event logs, and contact your HP
support representative to inspect the fabric and system firmware. WBEM EventID:
5161. WBEM ProviderName: FPL_IndicationProvider.Warning11807
76 WBEM Provider Event Tables