HP Insight Management WBEM Provider Events Reference Guide

An unrecoverable processor interrupt occurred while in IPF firmware. The event
data is the processor ISR. Probable Cause: Probable bug in System Firmware, EFI
driver, EFI app or OS loader (prior to OS launch). The event data field contains the
IVT offset applicable to the interrupt. See table 5-7 (Interruption Vector Table) in the
Intel ASDM Volume 2. Recommended Action: Provide console log containing register
dump to HP Customer Engineer. WBEM EventID: 6570. WBEM ProviderName:
FPL_IndicationProvider.Error12150
Double chip sparing has been invoked. Probable Cause: System firmware has detected
and corrected memory errors. Double chip sparing has been invoked to help mitigate
this condition. Recommended Action: On the next reboot, system firmware will test
the specified memory components, and may take them offline if the errors persist.
contact your HP support representative to check the specified memory components
at your next scheduled downtime. WBEM EventID: 6572. WBEM ProviderName:
FPL_IndicationProvider.Warning12153
External clock cable has been removed from the CPU cabinet. The data field contains
the physical location of the cabinet. Probable Cause: External clock cable has been
removed from the CPU cabinet. Recommended Action: Check external clock cable.
WBEM EventID: 6575. WBEM ProviderName: FPL_IndicationProvider.Error12155
System Fabric encountered a link error after opening up the fabric link. Probable
Cause: Fabric link errors were encountered. Recommended Action: Collect IPMI
event logs. Contact your HP Support Representative to check the health of the system
fabric. WBEM EventID: 6576. WBEM ProviderName: FPL_IndicationProvider.Warning12156
Fatal errors are present on a cell's link to the fabric. Data Field: (crossbar port 44) |
(crossbar 32) | 1. Probable Cause: Fatal errors are present on the cell to crossbar links.
Recommended Action: Collect IPMI Event logs. Contact your HP Support
Representative to check the fabric subsystem health. WBEM EventID: 6577. WBEM
ProviderName: FPL_IndicationProvider.Warning12157
System firmware encountered fabric problems. Data Field: (crossbar port 44) |
(crossbar 32). Probable Cause: Errors occurred while collecting error data from a
fabric link. Recommended Action: Collect IPMI Event logs. Contact your HP Support
Representative to check the fabric subsystem health. WBEM EventID: 6579. WBEM
ProviderName: FPL_IndicationProvider.Warning12159
Fatal errors are present on a cell's link to the fabric. Data Field: (crossbar port 44) |
(crossbar 32). Probable Cause: Fatal errors are present on a cell to crossbar link.
Recommended Action: Collect IPMI Event logs. Contact your HP Support
Representative to check the fabric subsystem health. WBEM EventID: 6580. WBEM
ProviderName: FPL_IndicationProvider.Warning12160
The operating system has recovered from a PCI error. Probable Cause: If the data
word is not 0x0000000400000000, then the problem is most likely with the PCI card.
If the value of the data word is 0x0000000400000000, then check event log with
keyword PCI_ERROR_STATUS. If PCI_ERROR_STATUS > 1, then the problem is in
the connection between System Bus Adapter and Lower Bus Adapter. If
PCI_ERROR_STATUS = 1, then the problem is in the Lower Bus Adapter. WBEM
EventID: 6910. WBEM ProviderName: FPL_IndicationProvider.Warning12161
The operating system has recovered from a PCI error. Probable Cause: See event
with keyword PCI_LBA_DEV_SPEC_1. WBEM EventID: 6911. WBEM ProviderName:
FPL_IndicationProvider.Warning12162
The operating system has recovered from a PCI error. Probable Cause: See log with
keyword PCI_LBA_DEV_SPEC_1 for more information. WBEM EventID: 6912. WBEM
ProviderName: FPL_IndicationProvider.Warning12163
The request to power on, either via MP user interface, power button, or other, was
denied by the Enclosure Manager. Probable Cause: The enclosure may not have
sufficient power for the new blade. Recommended Action: Make sure enclosure has
the appropriate number and configuration of power supplies. Reduce power required
by the blade (for instance, remove some memory or a CPU.) Or, if there are
powered-on blades that are not in use, power them off. WBEM EventID: 6581. WBEM
ProviderName: FPL_IndicationProvider.Error12164
82 WBEM Provider Event Tables