HP Integrity rx7640 and HP 9000 rp7440 Servers User Service Guide

Figure 51 Cell Board LED Locations
Table 25 Cell Board OL* LED Indicators
DescriptionStateDriven byLEDLocation
3.3 V Standby and Cell_Pwr_GoodOn GreenCell LPMPowerOn cell board
(located in the server
cabinet)
3.3 V Standby off, or 3.3 V Standby
on and no Cell_Pwr_Good
Off
Safe to remove the cell board from the
system
Flash YellowMP via GPMAttention
PCI-X OL* Card Divider LEDs
The PCI-X OL* card LEDs are located on each of the 16 PCI-X slot dividers in the PCI-X card cage
assembly area. The green power LED indicates whether power is supplied to the card slot. The
yellow attention LED states are defined in Table 28 (page 115).
Server LED Indicators 111