HP Integrity rx7640 and HP 9000 rp7440 Servers User Service Guide

Replacing the Top Cover
1. Orient the cover on the top of the chassis.
NOTE: Carefully seat the cover to avoid damage to the intrusion switch.
2. Slide the cover into position using a slow firm pressure to properly seat the cover.
3. Tighten the retaining screws to secure the cover to the chassis.
Removing and Replacing a Side Cover
It is necessary to remove and replace one or both of the side covers to access the components
within the server chassis.
Figure 63 Side Cover Locations
Removing a Side Cover
Figure 64 Side Cover Retaining Screws
Removing and Replacing a Side Cover 129