HP Integrity rx7640 and HP 9000 rp7440 Servers User Service Guide

1. Connect to ground with a wrist strap and grounding mat. See “Electrostatic Discharge ”
(page 126) for more information.
2. Loosen the retaining screw securing the cover to the rear of the chassis.
3. Slide the cover toward the rear of the chassis; then rotate outward and remove from chassis.
Figure 65 Side Cover Removal Detail
Replacing a Side Cover
1. Slide the cover in position.
2. The cover easily slides into position. Use a slow firm pressure to properly seat the cover.
3. Tighten the retaining screw to secure the cover to the chassis.
130 Removing and Replacing Components