HP Integrity rx7640 and HP 9000 rp7440 Servers User Service Guide

in the top of the chassis. When correctly installed, the cables must be configured as shown in
Figure 87.
Figure 87 SCSI and Power Cables for Slimline DVD+RW Installation
10. Carefully position the metal removable media cover over the SCSI data and power cables
and fasten into place.
CAUTION: Ensure the service length of the cables remains fixed as described in steps 7 and
8 when securing the removable media cover. Failure to comply will damage the removable
media drives, data, and power cables.
NOTE: The SCSI data cable end folds over the metal cover. The terminators sit on top of the
metal removable media cover.
11. Connect the removable media power cables into the mass storage backplane connectors.
12. Replace the top cover.
13. Connect the SCSI cables to the mass storage backplane.
14. Proceed with Installing the Slimline DVD+RW Drives.
148 Removing and Replacing Components