HP Integrity rx7640 and HP 9000 rp7440 Servers User Service Guide

B MP Commands
This appendix contains a list of the Server Management Commands.
Server Management Commands
Table 40 lists the server management commands.
Table 40 Service Commands
DescriptionCommand
Boot a partitionBO
Set the time and dateDATE
Display CRU Information of an EntityDF
Display and Set Locator LED statusLOC
Return to Main MenuMA
Power entities on or offPE
Allows user to configure the power gridPWRGRD
Reset entityRE
Reset partition for reconfigurationRR
Reset a partitionRS
Returns all System RevisionsSYSREV
Send a TOC signal to a partitionTC
Broadcast a message to all users of the MP command handlerTE
Display list of MP connected usersWHO
Table 41 lists the server status commands
Table 41 Status Commands
DescriptionCommand
Display partition cell assignmentsCP
Display entity statusDE
Display devices on busDU
Display the list of available commandsHE
Display LAN connected console statusLS
Display detailed power and hardware configuration statusPS
Table 42 lists the server system and access config commands
Table 42 System and Access Config Commands
DescriptionCommand
Configure Asynchronous and Modem parametersCA
Initiate a Complex ConfigurationCC
Generate ssl key pair and self signed certificateCG
Server Management Commands 169