HP Integrity rx7640 and HP 9000 rp7440 Servers User Service Guide

6. Remove the six bolts from the base that attaches the rack to the pallet.
Figure 13 Preparing to Roll Off the Pallet
WARNING! Be sure that the leveling feet on the rack are raised before you roll the rack
down the ramp, and any time you roll the rack on the casters. Use caution when rolling the
cabinet off the ramp. A single server in the cabinet may weigh in excess of 280 lbs. It is
strongly recommended that two people roll the cabinet off the pallet.
After unpacking the cabinet, examine it for damage that might have been obscured by the shipping
container. If you discover damage, document the damage with photographs and contact the
transport carrier immediately.
If the equipment has any damage, the customer must obtain a damage claim form from the shipping
representative. The customer must complete the form and return it to the shipping representative.
Securing the Cabinet
When in position, secure and stabilize the cabinet using the leveling feet at the corners of the base
(Figure 14 (page 36)). Install the anti-tip mechanisms on the bottom front and rear of the rack.
Receiving and Inspecting the Server Cabinet 35