HP Insight Manager WBEM Provider Events Reference

Event DescriptionEvent SeverityEvent ID
Boot cell launch EFI failure. Probable Cause: The system has failed to launch EFI
because of an internal error. Recommended Action: Reboot or update System FW. If
problem persists contact your HP representative for support. WBEM EventID: 203.
WBEM ProviderName: FPL_IndicationProviderError5010
Monarch selection failure. Probable Cause: An internal error has caused monarch
selection to fail. Recommended Action: Reboot. If problem persists contact your HP
representative for support. WBEM EventID: 204. WBEM ProviderName:
FPL_IndicationProviderError5011
CPU monarch collision. Probable Cause: Unexpected error has occurred during
monarch selection. Recommended Action: Reboot, if problem persists contact your
HP representative for support. WBEM EventID: 205. WBEM ProviderName:
FPL_IndicationProviderWarning5013
Boot cell virtualize EFI failure. Probable Cause: An internal error has occurred that
prevented EFI from virtualizing. Recommended Action: Reboot, if problem persists
contact your HP representative for support. WBEM EventID: 207. WBEM
ProviderName: FPL_IndicationProviderError5023
Boot cell virtualize PAL failure. Probable Cause: SFW was unable to virtualize PAL.
Recommended Action: Reboot, if problem persists contact your HP representative
for support. WBEM EventID: 208. WBEM ProviderName: FPL_IndicationProviderError5025
Boot cell virtualize SAL failure. Probable Cause: SFW was unable to virtualize SAL.
Recommended Action: Reboot, if problem persists contact your HP representative
for support. WBEM EventID: 209. WBEM ProviderName: FPL_IndicationProviderError5027
Boot cell virtualize SALPROC failure. Probable Cause: SFW was unable to virtualize
SALPROC. Recommended Action: Reboot, if problem persists contact your HP
representative for support. WBEM EventID: 210. WBEM ProviderName:
FPL_IndicationProviderError5028
CPU struct init failed. Probable Cause: A CPU has failed the configuration process.
Recommended Action: Replace CPU. If problem persists contact your HP
representative for support. WBEM EventID: 211. WBEM ProviderName:
FPL_IndicationProviderWarning5030
CPU failed early config. Probable Cause: A CPU has failed the early configuration
process. Recommended Action: Reboot. If problem persists contact your HP
representative for support. WBEM EventID: 212. WBEM ProviderName:
FPL_IndicationProviderWarning5031
CPU failed early selftest. Probable Cause: A CPU has failed early self test.
Recommended Action: Replace CPU. If problem persists contact your HP
representative for support. WBEM EventID: 213. WBEM ProviderName:
FPL_IndicationProviderWarning5033
CPU failed. Probable Cause: A CPU has failed. Recommended Action: Replace CPU.
If problem persists contact your HP representative for support. WBEM EventID: 214.
WBEM ProviderName: FPL_IndicationProviderWarning5034
CPU failed late selftest. Probable Cause: For ZX1 systems, a Correctable Single Bit
Memory error has caused CPU late self test to fail. It is possible the CPU is not faulty
in this case. For zx2 systems, the CPU has failed selftest. Recommended Action: Look
for the event 'MEM_CORR_ERR' from the last time the system was running. If you
find these events, replace that DIMM(s) before replacing the CPU's. Replace DIMMs
with excessive 'MEM_CORR_ERR' first. If after replacing all suspect DIMMs this
event is still seen, replace the CPU. Probable Cause: A CPU has failed. Recommended
Action: Replace CPU. If problem persists contact your HP representative for support.
WBEM EventID: 215. WBEM ProviderName: FPL_IndicationProviderWarning5036
CPU not enough late test memory. Probable Cause: Insufficient memory
Recommended Action: Increase memory and reboot. WBEM EventID: 216. WBEM
ProviderName: FPL_IndicationProviderWarning5037
Platform Events 13