HP Integrity rx8620 Server User Service Guide

Removing the Front Bezel
Figure 6-4 HP Integrity rx8620 Server Bezel Removal and Replacement
To remove the front bezel, follow these steps:
• From the front of the server, grasp both sides of the bezel and pull firmly toward you. The
catches release and the bezel pulls free.
Replacing the Front Bezel
To replace the front bezel, follow these steps:
1. If the bezel is being replaced, visually inspect the replacement part for the proper part
number.
2. From the front of the server, grasp both sides of the bezel and push toward the server. The
catches secure the bezel to the chassis.
Removing and Replacing the Front Panel Board
The front panel board is located in the front of the chassis. The system power must be turned off
to replace this FRU. See “Powering Off Hardware Components and Powering On the Server”
(page 106).
Removing and Replacing the Front Panel Board 111