HP Integrity rx8620 Server User Service Guide

Figure 6-14 Removable Media Drive Location
Removing the Removable Media Drive
To remove the media drive, follow these steps:
1. Turn off the power to the server.
2. Identify the failed removable media drive.
3. Connect to ground with a wrist strap. For more information, see “Electrostatic Discharge ”
(page 106).
4. Press the front locking tab to detach the drive from the chassis.
5. Pull the drive out of the chassis.
6. Unhook the cables from the rear of the drive. When removing the bottom drive, remove the
top drive first.
7. Slide the drive from the chassis.
8. Remove the rails and clips from the drive.
Figure 6-15 Removable Media Drive Detail
Removing and Replacing a Removable Media Drive 119