HP Integrity rx8620 Server User Service Guide

MP:CM> sysrev
Cabinet firmware revision report
PROGRAMMABLE HARDWARE :
System Backplane : GPM FM OSP
------- ------- -------
1.002 1.002 1.002
PCI-X Backplane : LPM HS
------- -------
2.000 1.000
Core IO : Master Slave
-------- -------
2.009 2.009
LPM PDHC
------- -------
Cell 0 : 1.002 1.007
Cell 1 : 1.002 1.007
Cell 2 : 1.002 1.007
Cell 3 : 1.002 1.007
FIRMWARE:
Core IO
Master : A.006.012
Event Dict. : 0.009
Slave : A.006.012
Event Dict. : 0.009
Cell 0
PDHC : A.003.023
Pri SFW : 21.003 (PA)
Sec SFW : 22.002 (PA)
Cell 1
PDHC : A.003.023
Pri SFW : 21.003 (PA)
Sec SFW : 22.002 (PA)
Cell 2
PDHC : A.003.023
Pri SFW : 21.003 (PA)
Sec SFW : 22.002 (PA)
Cell 3
PDHC : A.003.023
Pri SFW : 21.003 (PA)
Sec SFW : 22.002 (PA)
IO Cabinet FPGA and Firmware revision report
System Backplane : GPM FM OSP
------- ------- -------
1.002 1.002 1.002
PCI-X Backplane : LPM HS
------- -------
2.000 1.000
FPGA MP
------- -------
IOX Master Core IO : 2.009 A.006.012
Event Dict. 0.009
IOX Slave Core IO : 2.009 A.006.012
Event Dict. 0.009
11. After resetting the firmware, verify the firmware and programmable hardware revisions
again using the sysrev command. If all versions are now correct, continue to step 12. If not
correct, run dfw, fw or osp again to copy or download the correct firmware.
Removing and Replacing a Cell Board 131