HP Integrity rx8620 Server User Service Guide

1. Remove the right side cover. See “Removing and Replacing Covers” (page 108).
2. Remove the cell board. See “Removing the Cell Board” (page 121).
3. Place the cell board on the ESD safe work surface.
4. Loosen the four captive thumb screws securing the removable DIMM cover. See Figure 6-24.
Figure 6-24 DIMM Cover Assembly
5. Lift the cover to gain access to the DIMMs.
Removing a DIMM
To remove a DIMM, follow these steps:
1. Identify the defective DIMMs using Figure 6-25 to aid with DIMM location on cell board.
Figure 6-25 DIMM Detail with Locations
2. Using both DIMM removal tools, place the grooved side of each tool on each side of the
target DIMM. See Figure 6-26.
140 Removal and Replacement