HP Integrity rx8620 Server User Service Guide

Figure 6-29 CPU Cover Raised
10. Identify the CPUs to be removed.
11. Disconnect the CPU power pod cable connector from its connector on the cell board.
12. Disconnect the Turbocooler fan cable from the cell board.
Figure 6-30 CPUs with Turbocooler Fans
13. Loosen the four T15 heat-sink screws and the four turbocooler load screws. Loosen these
screws in an X pattern, rotating each screw two to three turns until all screws are loose from
the cell board.
14. Push the load screw sequencer toward the fan.
Removing and Replacing a Central Processing Unit 143