HP Integrity rx8620 Server User Service Guide

8. By inserting a screwdriver or pen between the fan blades, gently press the two amber tabs
underneath. Once the two tabs are pressed, the fan pops up. See Figure 6-39.
Figure 6-39 Heatsink with Turbo-Cooler Fan Removed
NOTE: There are two different heatsinks used in the turbo-cooler fan assemblies. The
removal and replacement procedure is essentially the same between the two. The machined
heatsink has thicker fins, and is one piece. The other heatsink has fins that are thinner and
soldered to a base piece. The machined heatsink has a clip holding the power cable in place
that cannot be removed. The soldered heatsink has a clip that must be removed in order to
correctly route the cable. See Figure 6-40 and Figure 6-41.
Figure 6-40 Soldered Heatsink and Clip
154 Removal and Replacement