HP Integrity rx8620 Server User Service Guide

IMPORTANT: If the igelan and c8xx drivers are not already in the kernel, they must be added
before installing the A7109A core I/O cards in the server. The HWE bundle required to enable
the card is HWE 0603.
Removing the Core I/O Assembly
To remove the core I/O, follow these steps:
1. Save all MP networking details, including: the IP address, hostname, subnet mask, gateway,
and other information.
2. To display the current MP customer LAN interface status enter the LS command from the
MP Command menu.
3. To determine the core I/O board status, use the MP:CM> PS, or the MP:CM> DE commands,
with option G. See Figure 6-46 and Figure 6-47.
Figure 6-46 PS Command
Removing and Replacing the Core I/O 159