HP Integrity rx8620 Server User Service Guide

Figure 6-57 PCI-X Card Assembly Air Baffle
9. Install PCI fans, PCI panel, top and side covers, and front bezel.
10. Replace the top and right side covers.
11. Replace the front bezel.
12. Power on the system.
13. Using the PS command, the domains are referred to as chassis 0 (zero) and 1.
Removing and Replacing the PCI OLR Assembly
The PCI OLR assembly is located in the rear of the chassis. You must turn off system power to
replace this FRU. See “Powering Off Hardware Components and Powering On the Server”
(page 106).
172 Removal and Replacement