HP Integrity rx8620 Server User Service Guide

C MP Commands
This appendix contains a list of the Server Management Commands.
Server Management Commands
Table C-1 lists the server m anagement commands.
Table C-1 Service Commands
DescriptionCommand
Boot a partitionBO
Set the time and dateDATE
Display FRU Information of an entityDF
Return to Main MenuMA
Power entities on or offPE
Allows user to configure the power gridPWRGRD
Reset entityRE
Reset partition for reconfigurationRR
Reset a partitionRS
Returns all system revisionsSYSREV
Send a TOC signal to a partitionTC
Broadcast a message to all users of the MP command handlerTE
Display list of MP connected usersWHO
Display and Set Locator LED statusLOC
Table C-2 lists the server status commands
Table C-2 Status Commands
DescriptionCommand
Display partition cell assignmentsCP
Display entity statusDE
Display devices on busDU
Display the list of available commandsHE
Display LAN connected console statusLS
Display detailed power and hardware configuration statusPS
Table C-3 lists the server system and access config commands
Table C-3 System and Access Config Commands
DescriptionCommand
Only displays local rs232 parametersCA
Initiate a Complex ConfigurationCC
Set parameters for ups monitoring via SNMPUPS
Server Management Commands 193