HP Integrity rx8620 Server User Service Guide

Redundant line cords attach to the AC power receptacles at the bottom rear. Two 20-amp cords
are required to power the server. Two additional line cords provide redundancy.
Access the system backplane by removing the left side cover. The system backplane hinges from
the lower edge and is anchored at the top with a single large jack screw assembly.
The SCSI ribbon cable assembly also routes across and fastens to the backside of the system
backplane near the connectors that attach the core I/O boards.
The blue deployment handles hinge outward to help lift and move the server into a rack.
32 Overview