HP Integrity rx8620 Server User Service Guide

Figure 2-10 Attaching the Ramp to the Pallet
13. Remove the two side cushions from the server and unfold the cardboard tray so that it lays
flat on the pallet.
Figure 2-11 Side Cushion Removal From the Server
14. Carefully roll the server off the pallet and down the ramp.
15. Obtain the caster covers from the wheel kit. Note that the caster covers are designed to fit
on either side of the server.
16. Insert the slot on the caster cover into the front caster. Secure the caster cover to the server
by tightening the captive screw on the cover at the rear of the server.
Wheel Kit Installation 43