HP Integrity rx8620 Server User Service Guide

3 Installing Accessories
The following options can be installed in the HP Integrity rx8620 Server:
• PCI I/O cards
• Additional hard disk drive storage
• Additional removable media device storage
Installing Add-On Products
CAUTION: Observe all ESD safety precautions before attempting these procedures. Failure to
follow ESD safety precautions can result in damage to the server.
This section provides information on additional products ordered after installation and any
dependencies for these add-on products.
Embedded Disks
When disks are installed, the top two hard disk drives are driven by cell 0 located in the server.
The bottom two hard disk drives are driven by cell 1 located in the server.
A list of replacement disk drives for the server is in Appendix A (page 183). The list contains both
removable media disk drives and hard disk drives.
Figure 3-1 Embedded Disks
Hard Disk Drive Installation
The disk drives are located in the front of the chassis. The hard disk drives are hot-pluggable
drives.
To install the hard disk drives, follow these steps:
1. Be sure the front locking latch is open, then position the disk drive in the chassis.
Installing Add-On Products 49